Belts
There
are three main types of belt, each of which can be fitted with plastic
or stainless steel pins and a range of product support systems between
25mm and 76mm. All conveyors are manufactured from low friction
polyethylene, whilst the modular belt can be supplied in a range of
plastic materials and colours. The belts are:
A one inch pitch sideflexing modular belt with a turning inside radius of 2.3 x belt width and is available in widths from 76mm, in increments of 76mm. It can be fitted with plastic or stainless steel pins, wear parts, tabs, rubber inserts and 25mm product supports. Standard materials are acetal, polypropylene and polyethylene.
A straight running one inch pitch closed top modular belt and is available in widths from 76mm, in increments of 76mm. It can be fitted with plastic or stainless steel pins, 25mm and 50mm product supports. Standard materials are acetal, polypropylene and polyethylene.
¾
Inch Pitch
A straight running ¾ inch modular belt
available with closed or open area up to 22%. Widths start from 76mm,
in increments of 76mm. It can be fitted with plastic or stainless steel
pins, 25mm and 50 mm product supports. Standard materials are acetal,
polypropylene and polyethylene.
Flight
Bands
Flight Bands can be supplied in 25mm, 51mm and 76mm heights, as standard.
